All the pieces from yesterday were installed today with fillets and fiberglass on almost every joint, and some on both sides.
The heater worked fine today which was great except for one small problem. It warmed up today above freezing and with the heater bringing the temperature up inside it really started raining. :-( Took about an hour before it quit and it was quite the circus while I ran around with cups and towels trying to keep the puddles down.
Anyways, here's a ton of photos of todays progress.
There's the two joints for the bulkhead to the hull and a couple inside the cuddy to finish. I need to epoxy a nailer to that vertical piece in the picture above (it may be a little tall too) and I need to put a layer of fiberglass in the bottom of all the storage areas. That work is for tomorrow.
5 Hours