So trimmed out the green glass on the inside, then pulled the blue tape on the outside. Was very pleased to find that the peanut butter pushed into the gaps from the inside either slightly pushed through or was just short of the blue tape. That made the rest of tonight easier.
Sanded the areas to be fiberglassed, cut strips of fiberglass, made epoxy and peanut butter and applied same, carefully pushing all the peanut butter into the cracks that would go.
My fillet and fiberglass work is getting better as time goes on. Practice, as they say, makes, if not perfect, at least respectfully good. :-)
Tomorrow will be a short night, but I'll use it to fill the weave on the windows as well as the radar mount on the roof.
3 Hours